SiriusXM Outdoor Home Antenna

Note: To complete the installation of the Outdoor Home Antenna, you will need to purchase separately one or more RG-6 cables, to connect the Outdoor Home Antenna to the Home Dock. Refer to the User Guide for more details.

Step 1: Mount the Antenna

Place the Indoor/Outdoor Home Antenna outdoors on a window ledge, porch, table, or patio, where it has a clear, unobstructed view of the south sky.

You could also attach it to a soffit of the house with the antenna having a straight up view of the sky or attach it on a south facing wall of the house provided that the antenna has a clear, unobstructed view of the south sky. Use the mounting points on the antenna's base to attach the antenna to the house.

Note:

• There should NOT be any obstructions such as bushes, trees, other homes or buildings, overhangs, soffits, chimneys, gables, dormers, etc., blocking the antenna's view of the south sky. Be aware that depending upon where you place the antenna, your own home may block the antenna's view of the satellite.



The Outdoor Home Antenna can be mounted on a wall, on a soffit or chimney, or on a pole or satellite dish mast.

Wall Mounting: Use the provided screws to mount the base of the antenna to a wall on your home.



Soffit or Chimney Mounting: Use the provided screws to mount the base of the antenna to your home's roof (on a soffit).



Note: If you decide to choose this option, DO NOT mount the antenna such that it requires you to drill mounting holes through the shingles of your roof. Mount the antenna on an eve or soffit of the roof.

Pole Mounting: Use the provided U-bolt hardware to mount the base of the antenna to a pole or satellite antenna mast.



Note: When mounting the Outdoor Home Antenna to a satellite TV antenna mast be sure that the satellite TV antenna does not ob- struct the antenna's view of the southern sky.

NEXT: ADJUST THE ANTENNA

Step 2: Adjust the Antenna

Adjust the antenna's pod (where the SiriusXM logo appears) so it is level and horizontal relative to the sky. The antenna has two adjustments to accomplish this:

1

Tilting the angle of the pod

2

Adjusting the pod support arm

< NEXT: CONNECT ANTENNA TO HOME DOCK

Step 3: Connect the Home Dock

Next, route the cable to your Home Dock and connect it to the Adapter Cable that is included with the kit. Connect the other end of the Adapter Cable to the ANT connection on your Home Dock

Step 4: Connect the Antenna

Once you have determined a possible mounting location for the antenna, before permanently installing it at that place, you need to test whether you are receiving a good signal. Keeping the antenna orientation as intended, you will first temporarily install the RG-6 cable you purchased separately between the antenna and the Home Dock. Connect the RG-6 cable to the antenna pod and slide the rubber boot over the connection to weatherproof it.

Step 5: Verify Signal Reception

The Signal Indicator screen shows the strength of both the satellite (SAT) signal and the terrestrial (ground) signal (if available).

If reception is weak, review the mounting location to be sure that the antenna pod has an unobstructed view of the southern sky, and review the position of the antenna pod to be sure that it is horizontal relative to the sky.

Once you have verified that the antenna is positioned correctly and receiving a good signal, the installation is complete.

Note: If you are installing the Signal Distribution Kit, follow the installation instructions which accompanied the Signal Distribution Kit to complete the installation.